INSTALLATION
Removal / installation · Vehicles built from Aug 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
- CAUTION:
- Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Click here ).
| 1. INSTALL ROOF SIDE RAIL BRACKET LH |
![]() ![]() |
- Torque:
- 14 N*m{ 143 kgf*cm , 10 ft.*lbf }
| 2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH |




Short body:
Install the curtain shield airbag with the 9 bolts.
Long body:
Install the curtain shield airbag with the 10 bolts.- Torque:
- 14 N*m{ 143 kgf*cm , 10 ft.*lbf }
- NOTICE:
- Do not twist the curtain shield airbag when installing it.
Connect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
| 3. INSTALL ROOF HEADLINING ASSEMBLY |
Short body:
Install the roof headlining (Click here).
Long body:
Install the roof headlining (Click here).
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).

