REMOVAL
Removal / installation · Vehicles built from Jan 2007
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
- CAUTION:
- Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Click here).
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE RADIATOR SUPPORT OPENING COVER |
| 3. REMOVE FRONT AIRBAG SENSOR LH |
![]() ![]() |
Disconnect the sensor connector.
Remove the bolt and sensor.
| 4. REMOVE FRONT AIRBAG SENSOR RH |
![]() ![]() |
Disconnect the sensor connector.
Remove the bolt and sensor.



