INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT STEERING PAD SWITCH ASSEMBLY |
Measure the resistance of the switch.
- Standard resistance:
Tester Connection
Switch Condition
Specified Condition
6 (AU1) - 8 (EAU)
VOL+ switch pushed
1 kΩ
6 (AU1) - 8 (EAU)
VOL- switch pushed
3.11 kΩ
6 (AU1) - 8 (EAU)
Not pushed
10 kΩ or higher
6 (AU1) - 8 (EAU)
SEEK+ switch pushed
Below 1Ω
6 (AU1) - 8 (EAU)
SEEK- switch pushed
329 Ω
7 (AU1) - 8 (EAU)
Not pushed
10 kΩ or higher
7 (AU2) - 8 (EAU)
Mode switch pushed
Below 1Ω
7 (AU2) - 8 (EAU)*
ON HOOK switch pushed
329 Ω
6 (AU1) - 8 (EAU)*
OFF HOOK switch pushed
1 kΩ
6 (AU1) - 8 (EAU)*
VOICE switch pushed
3.11 kΩ
- HINT:
- *: w/ Navigation system


If the result is not as specified, replace the switch assembly.
