INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL DIFFERENTIAL PRESSURE SENSOR |
Using pliers, grip the claws of the 2 clips and slide the 2 clips to connect the 2 vacuum transmitting hoses.
- NOTICE:
-


- Connect the sensor so that the painted marks of the 2 hoses are as shown in the illustration.
Install the sensor with the nut.

- Torque:
- 6.5 N*m{ 66 kgf*cm , 58 in.*lbf }
Connect the sensor connector.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
