2005-2008 RAV4 · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2007


1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

  1. D026703E02
    Place SST on the return spring and compress the return spring with a press.
    SST
    09387-00060  

  1. Using a screwdriver, remove the snap ring.

  1. D026704E04
    Remove the 2nd brake piston return spring.


2. REMOVE 2ND BRAKE PISTON

  1. D026705E01
    Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.

    NOTICE:
    Hold the piston with a shop rag or a piece of cloth when removing the piston. Failure to do so may result in the piston jumping out from the cylinder.


3. REMOVE 2ND BRAKE PISTON O-RING

  1. D026706E03
    Remove the 2 O-rings from the 2nd brake piston.

← COMPONENTS (from Aug 2007)INSPECTION (from Aug 2007) →