REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE MAP LIGHT ASSEMBLY |
![]() ![]() |
Detach the 4 clips and remove the map light.
Disconnect the light connector.
| 3. REMOVE MAP LIGHT LENS |
![]() ![]() |
Using a screwdriver, pry out the 8 claws and remove the map light lens.
- HINT:
- Tape the screwdriver tip before use.



