INSTALLATION
Removal / installation · Vehicles built Nov 2005 – Jul 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
- HINT:
- Use the same procedures for the RH and LH sides.
- The procedures listed below are for the LH side.
- Use the same procedures for the RH and LH sides.
| 1. INSTALL FOG LIGHT ASSEMBLY |
![]() ![]() |
Install the fog light with the 3 bolts.
Connect the connector.
| 2. INSTALL FRONT BUMPER COVER |
Put protective tape under the front fender and headlight.

Install the 4 clips.
Install the hood cushion center.

w/ Headlight Cleaner:
Connect the headlight cleaner.
w/ Fog Light:
Connect the 2 fog light connectors.
Attach the 4 claws to install the bumper cover.

Install the 8 screws.

| 3. INSTALL RADIATOR SUPPORT OPENING COVER |
Install the 2 clips.

| 4. INSTALL FRONT FENDER LINER RH |
- HINT:
- Use the same procedures described for the LH side.
| 5. INSTALL FRONT FENDER LINER LH |
Install the clip and bumper retainer.

Install the bolt.
- Torque:
- 6.0 N*m{ 61 kgf*cm , 53 in.*lbf }
| 6. INSTALL CABLE TO NEGATIVE BATTERY TERMINAL |

