2005-2008 RAV4 · Service Manual HEATER & AIR CONDITIONING SYSTEM

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Nov 2005


GENERAL
  1. The air conditioning system has the following features:

    1. In accordance with the temperature set using the temperature control switch, the air conditioning amplifier determines the outlet temperature based on the input signals from various sensors. In addition, corrections are added in accordance with the signals from the water temperature sensor to control the outlet air temperature.
    2. Controls the blower motor in accordance with the airflow volume determined by the air conditioning amplifier based on the input signals from various sensors.
    3. Automatically changes the outlets in accordance with the outlet mode ratio that is determined by the air conditioning amplifier based on the input signals from various sensors.
    4. Based on the signals from the ambient temperature sensor, this system calculates the outside temperature and indicates it in the multi-information display in the combination meter assembly.
    5. The left/right independent temperature control and neural network control make air conditioner control available to suit the persons in the driver seat and in the passenger seat.
    6. The Positive Temperature Coefficient (PTC) heater system contains a PTC heater that heats the air that has passed through the heater core to ensure the proper heater performance.
    7. A combustion type power heater is available as optional equipment to provide comfortable heater performance in cold areas.
    8. Turns the rear defogger and outside rear mirror heaters on for 15 minutes when the rear defogger switch is pressed. Turns them off if the switch is pressed while they are operating.
    9. Checks the sensors in accordance with the operation of the air conditioner switches.
    10. The air conditioning amplifier has the function of controlling the indicator lighting.


MODE POSITION AND DAMPER OPERATION
E123547E01
Control Damper
Control Position
Damper Position
Operation
Air Inlet Control Damper
FRESH
A
Brings in fresh air.
RECIRC
B
Recirculates internal air.
Air Mix Control Damper
(Left/Right Independent Control)
Driver and Front Passenger Side
MAX COOL to MAX HOT
(TEMP. SETTING 18 to 32°C (65 to 85°F))
C, D, E
Varies mixture ratio of fresh air and recirculation air in order to regulate temperature continuously from HOT to COOL.
Mode Control Film Damper
Driver and Front Passenger Side
E106656
FACE
I, J, L, P, U
Air blows out of center registers and side registers.
E106657
BI-LEVEL
I, Q, M, R, T
Air mainly blows out of center registers, side registers, and footwell register ducts.
E106658
FOOT
H, K, N, O, S
Air mainly blows out of front and rear footwell register ducts.
In addition, air blows out slightly from front and side defrosters, and side registers.
E106659
FOOT/DEF
G, K, N, O, T
Air mainly blows out of front and side defrosters to defrost windshield. Air also blows out from front and rear footwell register ducts, and side registers.
E106660
DEF
F, K, N, O, U
Air blows out of front and side defrosters and side registers to defrost windshield.

AIR OUTLET AND AIRFLOW VOLUME
The circle size (○) indicates the proportion of the flow volume.
E123535E01
Air Outlet Mode
Air Outlet Position Symbol
A
B
C
D
Center Face
Side Face
Foot
Defroster
E106656
FACE
E107019
E107019
X
X
E106657
BI-LEVEL
E107021
E107021
E107020
X
E106658
FOOT
X
E107317
E107020
E124204
E106659
FOOT/DEF
X
E107317
E107021
E107021
E106660
DEF
X
E107021
X
E107019
← SYSTEM DIAGRAM (from Aug 2007)HOW TO PROCEED WITH TROUBLESHOOTING (Nov 2005 – Dec 2006) →