ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| REMOVE IG1 RELAY |
Remove the IG1 relay from the instrument panel junction block.
| INSPECT IG1 RELAY |
Measure resistance of the IG1 relay.

- Standard resistance:
Tester Connection
Specified Condition
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
| INSTALL IG1 RELAY |
| CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
