ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| REMOVE GLOW PLUG RELAY |
Remove the glow plug relay.
| INSPECT GLOW PLUG RELAY |
Measure the resistance of the relay.

- Standard resistance:
Terminal No.
Specified Condition
3 - 4
10 kΩ or higher
3 - 4
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
| INSTALL GLOW PLUG RELAY |
| CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
