2005-2008 RAV4 · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 from Jan 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the instrument panel (Click here).


3. DISCONNECT CONNECTORS
  1. Disconnect the stop light switch connector.

  1. w/ VSC:
    Disconnect the brake pedal load sensing switch connector.


4. REMOVE STOP LIGHT SWITCH ASSEMBLY
  1. Turn the switch counterclockwise and remove it.


5. REMOVE PUSH ROD PIN
  1. Remove the clip from the push rod pin.

  1. Remove the push rod pin from the push rod clevis.


6. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

  1. C129086E01
    Remove the bolt from the support.

  1. C126454
    Remove the 4 nuts and support.

← COMPONENTS (from Jan 2007)REMOVAL (from Jan 2007) →