REMOVAL
Removal / installation · Vehicles built from Aug 2007
Versions by build date: Nov 2005 – Jul 2007 from Aug 2007
- HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.
| 2.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- Wash off brake fluid immediately if it comes in contact with any painted surface.
| 3.
REMOVE REAR BRAKE TUBE FLEXIBLE HOSE |
 |
- Disconnect the brake tube (labeled A) from the flexible hose with SST while holding the flexible hose with a wrench.
- SST
- 09023-00101
- NOTICE:
- Do not bend or damage the brake tube.
- Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.
Remove the clip (labeled B).
- Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.