2005-2008 RAV4 · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT MAP LIGHT ASSEMBLY

B131564E01
  1. Measure the resistance of the switch.

    Standard resistance:
    Switch Condition
    Tester Connection
    Specified Condition
    TILT UP
    8 (UP) - 7 (GND)
    Below 1 Ω
    TILT DOWN
    9 (DOWN) - 7 (GND)
    Below 1 Ω
    SLIDE CLOSE
    8 (UP) - 7 (GND)
    Below 1 Ω
    SLIDE OPEN
    9 (DOWN) - 7 (GND)
    Below 1 Ω

    If the result is not as specified, replace the map light assembly.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →