Air Conditioning Control Panel does not Operate
Circuit diagnosis · Vehicles built from Nov 2005
DESCRIPTION
This circuit consists of the air conditioning control and the air conditioning amplifier. When the air conditioning control is operated, signals are transmitted to the air conditioning amplifier through the LIN communication system.If the LIN communication system malfunctions, the air conditioning amplifier does not operate even if the air conditioning control is operated.
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK WIRE HARNESS (AIR CONDITIONING CONTROL ASSEMBLY - BODY GROUND) |
![]() ![]() |
Disconnect the air conditioning control assembly connector.
Measure the resistance of the wire harness side connector.
- Standard resistance:
Tester Connection
Specified Condition
E26-7 (GND) - Body ground
Below 1 Ω
|
|
||||
| OK | |
| 2. CHECK WIRE HARNESS (AIR CONDITIONING CONTROL ASSEMBLY - BATTERY) |
![]() ![]() |
Disconnect the E26 air conditioning control assembly connector.
Measure the voltage of the wire harness side connector.
- Standard voltage:
Tester Connection
Condition
Specified Condition
E26-7 (GND) - E26-2 (IG+)
Ignition switch on (IG)
10 to 14 V
|
|
||||
| OK | |
| 3. CHECK WIRE HARNESS (AIR CONDITIONING AMPLIFIER - AIR CONDITIONING CONTROL) |
![]() ![]() |
Disconnect the E26 control connector.
Disconnect the E41 amplifier connector.
Measure the resistance of the wire harness side connector.
- Standard resistance:
Tester Connection
Specified Condition
E41-37 (LIN1) - E26-11 (LIN1)
Below 1 Ω
|
|
||||
| OK | |
| 4. REPLACE AIR CONDITIONING CONTROL ASSEMBLY |
Replace the air conditioning control with a new or properly functioning one.
Operate the air conditioning control to check that it functions properly.
- Result:
Result
Proceed to
Air conditioning control malfunctions
A
Air conditioning control functions properly
B
|
|
||||
| A | ||
| ||



