Charge Warning Light Comes ON while Driving
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. CHECK GENERATOR PULLEY WITH CLUTCH (LOCK FUNCTION) |
Check the lock function with the pulley installed in the vehicle.
Visually check that the rotor in the generator operates with the engine started.
Check the lock function with the pulley removed from the vehicle.
Remove the pulley cap. Using SST, hold the generator rotor.
Turn the pulley clockwise and check that the outer ring locks.

- OK:
- The outer ring locks.
- SST
- 09820-63020
|
|
||||
| OK | |
| 2. CHECK GENERATOR PULLEY WITH CLUTCH (LOCK) |
Start the engine and visually check looseness of the pulley.
- OK:
- The pulley is not loose.
|
|
||||
| OK | ||
| ||
