2005-2008 RAV4 · Service Manual ENGINE

Charge Warning Light Comes ON while Driving

Circuit diagnosis · Vehicles built from Aug 2007

INSPECTION PROCEDURE


1. CHECK LOCK FUNCTION OF CLUTCH PULLEY
  1. Check the lock function with the pulley installed in the vehicle.

    1. Visually check that the rotor in the generator operates with the engine started.

  1. Check the lock function with the pulley removed from the vehicle.

    1. Remove the generator pulley cap. Using SST, hold the generator rotor.

    2. A118368E01
      Turn the clutch pulley clockwise and check that the outer ring locks.

      OK:
      The outer ring locks.

SST
09820-63020  


NG
REPLACE CLUTCH PULLEY
OK


2. CHECK LOCK OF CLUTCH PULLEY
  1. Start the engine and visually check the clutch pulley for looseness.

    OK:
    The clutch pulley is not loose.



NG
TIGHTEN CLUTCH PULLEY TO THE SPECIFIED TORQUE
OK

REPLACE GENERATOR ASSEMBLY


← ON-VEHICLE INSPECTION (from Aug 2007)Noise Occurs from Generator while Engine is Running (from Aug 2007) →