CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Nov 2005
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
| Display (Item) |
Default |
Contents |
Setting |
| Lighting Time (Lighting Time) |
15 seconds |
Changes illumination duration after door closure. (It will quickly fade out in case of turning ignition switch on (IG). |
7.5/15/30 (seconds) |
| I/L ON /ACC OFF (Room light illuminates when ignition switch turned off) |
ON |
Illuminates light when ignition switch turned on (ACC). (Room light illuminated when room light switch in DOOR position) |
ON/OFF |
| I/L ON / UNLOCK (Room light illuminates when door key unlocked.) |
ON |
Function to light up room light, when unlocking with door key cylinder. (Room light illuminated when room light switch in DOOR position) |
ON/OFF |
| Light Control |
ON |
For A/T: Function to light up foot light when ignition switch is on (IG) and shift position is not P. For M/T: Function to light up foot light when ignition switch is on (IG) and release the parking brake lever. |
ON/OFF |
- HINT:
- Sensitivity adjustments are difficult to confirm. Check by driving the customer's vehicle.