REPAIR
Removal / installation · Vehicles built from Nov 2005
| 1. REPAIR DEFOGGER WIRE |
![]() ![]() |
Clean the broken wire tips with grease, wax and silicone remover.
Place masking tape along both sides of the wire.
Thoroughly mix the repair agent.
- Dupont paste:
- No. 4817 or equivalent
Using a fine tip brush, apply a small amount of the agent to the wire.

After a few minutes, remove the masking tape.
- NOTICE:
- Do not repair the defogger wire again for at least 24 hours.

