INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT SEAT HEATER SWITCH |
Measure the resistance of the seat heater switch when the switch is operated.

- Standard resistance:
for LH Tester Connection
Switch Condition
Specified Condition
5 (IG) - 6 (LH)
ON
Below 1 Ω
5 (IG) - 6 (LH)
OFF
10 kΩ or higher
for RH Tester Connection
Switch Condition
Specified Condition
4 (IG) - 3 (RH)
ON
Below 1 Ω
4 (IG) - 3 (RH)
OFF
10 kΩ or higher
Check that the seat heater switch indicator light illuminates when the switch is operated.

- OK:
for LH Measurement Connection
Switch Condition
Specified Condition
Battery positive (+) → 5 (IG)
Battery negative (-) → 2 (E)
ON
Illuminates
for RH Measurement Connection
Switch Condition
Specified Condition
Battery positive (+) → 4 (IG)
Battery negative (-) → 2 (E)
ON
Illuminates
Check that the seat heater switch illuminates.

- OK:
Measurement Connection
Switch Condition
Specified Condition
Battery positive (+) → 7
Battery negative (-) → 8
Always
Illuminates
