REMOVAL
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE SWITCH BASE
|
 |
Detach the 2 clips and 2 claws.
Disconnect the connectors and remove the switch base.
| 3.
REMOVE SEAT HEATER SWITCH |
 |
- Using a screwdriver, detach the 2 claws and remove the switch.
- HINT:
- Tape the screwdriver tip before use.