REASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL OIL PUMP ROTOR |
 |
Remove the oil pump rotor.
Coat the drive rotor and driven rotor with engine oil.
- Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.
| 2.
INSTALL OIL PUMP COVER |
 |
- Install the oil pump cover with the 5 bolts.
-
Torque:
- 8.8 N*m{
90 kgf*cm
, 78 in.*lbf
}
| 3.
INSTALL OIL PUMP RELIEF VALVE |
 |
- Coat the relief valve with engine oil.
Insert the relief valve and spring into the pump body hole.
Using a 27 mm socket wrench, install the plug.
-
Torque:
- 49 N*m{
500 kgf*cm
, 36 ft.*lbf
}
| 4.
INSTALL OIL PUMP STRAINER |
 |
- Install a new gasket and the oil pump strainer with the 2 nuts.
-
Torque:
- 8.8 N*m{
90 kgf*cm
, 78 in.*lbf
}