2005-2008 RAV4 · Service Manual ENGINE

REPLACEMENT

Removal / installation · Vehicles built from Nov 2005


1. REPLACE TIMING CHAIN COVER OIL SEAL

  1. A032626E01
    Using a screwdriver and hammer, tap out the oil seal.

  1. Place the oil seal retainer on wooden blocks.

  1. Apply multi-purpose grease to the lip of a new oil seal.

    NOTICE:
    Keep the lip free of foreign objects.

  1. A094547E01
    Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear case edge.
    SST
    09223-22010  

    NOTICE:
    Do not tap the oil seal at an angle.

← INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →