2005-2008 RAV4 · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Aug 2008

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008


1. INSTALL NO. 1 INSTRUMENT PANEL CUSHION

  1. B208655
    Install the cushion.

    HINT:
    The No. 1 instrument panel cushion can be reused. However, if sufficient adhesion cannot be attained, replace the No. 1 instrument panel cushion with a new one.


2. INSTALL NO. 4 INSTRUMENT PANEL CUSHION

  1. B208362
    Install the cushion.

    HINT:
    The No. 4 instrument panel cushion can be reused. However, if sufficient adhesion cannot be attained, replace the No. 4 instrument panel cushion with a new one.

  1. B208363
    Install the cushion.

    HINT:
    The No. 4 instrument panel cushion can be reused. However, if sufficient adhesion cannot be attained, replace the No. 4 instrument panel cushion with a new one.


3. INSTALL LOWER NO. 1 INSTRUMENT PANEL CUSHION

  1. B208654E01
    Install the 2 cushions.

    HINT:
    The lower No. 1 instrument panel cushion can be reused. However, if sufficient adhesion cannot be attained, replace the lower No. 1 instrument panel cushion with a new one.


4. INSTALL METER MOUNTING BRACKET

  1. B128207
    Install the 2 brackets with the 2 screws.


5. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)
  1. Attach the 2 claws to install the thermistor.


6. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (for Automatic Light Control System)
  1. Attach the 2 claws to install the sensor.


7. INSTALL NO. 2 INSTRUMENT PANEL WIRE

  1. B208361
    Attach the wire harness clamp to install the instrument panel wire.

  1. Connect the connectors.


8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
  1. Attach the rear side hook of the front passenger airbag to the rear side airbag door.

  1. Bend the front side hook so that it attaches to the front side airbag door.

  1. Install the instrument panel upper (Click here).

  1. Install the 2 bolts to the reinforcement.

    Torque:
    20 N*m{ 203 kgf*cm , 14 ft.*lbf }

  1. B127928E01
    Connect the connector to the airbag.

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.

  1. Attach the wire harness clamp to the bracket.


9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

  1. B208653E01
    Install the 2 cushions.

    HINT:
    The No. 1 instrument panel finish cushion can be reused. However, if sufficient adhesion cannot be attained, replace the No. 1 instrument panel finish cushion with a new one.


10. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

11. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

12. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

B129896
  1. Attach the 3 clamps.

  1. Install the navigation antenna with the 2 screws.


13. INSTALL NO. 3 HEATER TO REGISTER DUCT

  1. B208595
    Install the duct with the 2 screws.


14. INSTALL NO. 2 HEATER TO REGISTER DUCT

  1. B208594
    Install the duct with the screw.


15. INSTALL NO. 1 HEATER TO REGISTER DUCT

  1. B208593
    Install the duct with the screw.


16. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

  1. B208592
    Install the duct with the 3 screws.


17. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

  1. B208591
    Install the duct with the 3 screws.

← REASSEMBLY (Aug 2007 – Jul 2008)INSTALLATION (Nov 2005 – Dec 2006) →