DISASSEMBLY
Removal / installation · Vehicles built from Aug 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |
|
| 2.
REMOVE FUSE BOX OPENING COVER |
 |
- Detach the 2 claws and 2 clips, and then remove the cover.
| 3.
REMOVE INSTRUMENT PANEL SAFETY PAD COVER (for LHD) |
 |
- Using a screwdriver, detach the 4 claws and remove the instrument panel safety pad cover.
- HINT:
- Tape the screwdriver tip before use.
| 4.
REMOVE COOLER (ROOM TEMP. SENSOR) THERMISTOR (for Automatic Air Conditioning System) |
 |
- Detach the claws and remove the cooler thermistor.
| 5.
REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
 |
- Detach the claws and remove the interior illumination light.
| 6.
REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
 |
- Rotate the lights in the direction shown in the illustration, disconnect the wire harness clamps and remove the interior illumination light.
| 7.
REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY |
 |
- Detach the wire harness clamps and remove the antenna cord.