INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT PURGE VSV |
![]() ![]() |
Measure the resistance of the purge VSV.
- Standard resistance:
Tester Connection
Specified Condition
1 - 2
23 to 26 Ω at 20°C (68°F)
1 - Body ground
2 - Body ground
10 MΩ or higher
Check the operation of the purge VSV.
Check that air does not flow from port E to port F.

Apply battery voltage across the terminals.

Check that air flows from port E to port F.
If the result is not as specified, replace the purge VSV.

