2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL VENTILATION VALVE SUB-ASSEMBLY

  1. A092670E03
    Apply adhesive to 2 or 3 threads of the ventilation valve.

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent

  1. A098067E01
    Using a 22 mm deep socket wrench, install the ventilation valve.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

  1. Connect the ventilation hose.


2. INSTALL NO. 1 ENGINE COVER

  1. A112206
    Install the engine cover with the 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }


3. CHECK FOR ENGINE OIL LEAKS
  1. Start the engine, and check that there are no oil leaks.

← INSPECTION (from Nov 2005)PARTS LOCATION (from Nov 2005) →