INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL VENTILATION VALVE SUB-ASSEMBLY |
 |
- Apply adhesive to 2 or 3 threads of the ventilation valve.
- Adhesive:
- Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent
- Using a 22 mm deep socket wrench, install the ventilation valve.
-
Torque:
- 19 N*m{
194 kgf*cm
, 14 ft.*lbf
}
Connect the ventilation hose.
| 2.
INSTALL NO. 1 ENGINE COVER
|
 |
- Install the engine cover with the 2 nuts.
-
Torque:
- 7.0 N*m{
71 kgf*cm
, 62 in.*lbf
}
| 3.
CHECK FOR ENGINE OIL LEAKS |
|