INSTALLATION
Removal / installation · Vehicles built from Aug 2007
| 1.
INSTALL VENTILATION VALVE SUB-ASSEMBLY |
 |
- Apply adhesive to 2 or 3 threads of the ventilation valve.
- Adhesive:
- Toyota genuine adhesive 1324, three bond 1324 or equivalent
- Using a 22 mm deep socket wrench, install the ventilation valve.
-
Torque:
- 27 N*m{
275 kgf*cm
, 20 ft.*lbf
}
- Connect the ventilation hose.
| 2.
INSTALL V-BANK COVER SUB-ASSEMBLY
|
 |
- Attach the 3 clips to install the engine cover.
| 3.
INSPECT FOR ENGINE OIL LEAK |
|