2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

  1. A124798E01
    Using SST, install the sensor to the exhaust manifold.
    SST
    09224-00010  

    Torque:
    40 N*m{ 408 kgf*cm , 30 ft.*lbf } for use with SST
    44 N*m{ 449 kgf*cm , 32 ft.*lbf } for use without SST

    HINT:
    1. Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
    2. Make sure SST and wrench are connected in a straight line.

  1. Connect the sensor connector.


2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. CHECK FOR EXHAUST GAS LEAKS
← INSPECTION (from Nov 2005)COMPONENTS (from Nov 2005) →