2005-2008 RAV4 · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Aug 2007


1. INSTALL SPEED SENSOR NC

  1. C133979
    Coat a new O-ring with ATF.

  1. Install the O-ring to the sensor.

  1. Install the sensor with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

  1. Connect the sensor connector.


2. INSTALL SPEED SENSOR NT

  1. C133978
    Coat a new O-ring with ATF.

  1. Install the O-ring to the sensor.

  1. Install the sensor with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

  1. Connect the sensor connector.


3. INSTALL BATTERY BRACKET REINFORCEMENT

  1. A124919
    Install the bracket reinforcement with the 2 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }


4. INSTALL FRONT BATTERY BRACKET

  1. A173727
    Install the front battery bracket with the 4 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

  1. Attach the 2 wire harness clamps.


5. INSTALL BATTERY

6. INSTALL BATTERY CLAMP SUB-ASSEMBLY
  1. Attach the hook of the battery clamp to the front battery bracket.

  1. Temporarily tighten the nut and install the bolt.

  1. Adjust the battery clamp position.

  1. A124917E01
    Fully tighten the nut and bolt.

    Torque:
    Bolt:
    17 N*m{ 170 kgf*cm , 12 ft.*lbf }
    Nut:
    4.9 N*m{ 50 kgf*cm , 43 in.*lbf }

  1. Attach the 2 wire harness clamps.


7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSPECTION (from Aug 2007)COMPONENTS (from Aug 2007) →