REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE BATTERY |
Loosen the nut and remove the bolt and battery clamp.
Remove the battery.
Remove the battery tray.
Remove the 4 bolts and battery carrier.
Remove the 2 bolts and battery bracket reinforcement.
| 3. REMOVE SPEED SENSOR NT |
![]() ![]() |
Disconnect the sensor connector.
Remove the bolt and sensor.
Remove the O-ring from the sensor.
| 4. REMOVE SPEED SENSOR NC |
![]() ![]() |
Disconnect the sensor connector.
Remove the bolt and sensor.
Remove the O-ring from the sensor.



