REPLACEMENT
Removal / installation · Vehicles built from Aug 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1.
DRAIN AUTOMATIC TRANSAXLE FLUID |
 |
Remove the drain plug, gasket and drain ATF.
Install a new gasket and drain plug.
-
Torque:
- 47 N*m{
479 kgf*cm
, 35 ft.*lbf
}
| 2.
REMOVE FRONT DRIVE SHAFT ASSEMBLY |
 |
Remove the drive shaft (Click here).
| 3.
REMOVE DRIVE SHAFT BEARING BRACKET |
 |
Remove the 3 bolts and bracket.
| 4.
REMOVE TRANSAXLE HOUSING OIL SEAL LH AND RH |
 |
Using SST, tap out the oil seal LH.
- SST
- 09308-00010
- Using SST, tap out the oil seal RH.
- SST
- 09308-00010
| 5.
INSTALL TRANSAXLE HOUSING OIL SEAL LH AND RH |
 |
Coat the lip of a new oil seal LH with MP grease.
- Using SST and a hammer, tap in the oil seal LH.
- SST
- 09608-32010
09950-70010
(09951-07150)
- Standard depth:
- 0 +-0.5 mm (0 +-0.020 in.)
Coat the lip of a new oil seal LH with MP grease.
- Using SST and a hammer, tap in the oil seal RH.
- SST
- 09608-32010
09950-70010
(09951-07150)
- Standard depth:
- 0 +-0.5 mm (0 +-0.020 in.)
| 6.
INSTALL DRIVE SHAFT BEARING BRACKET |
 |
Install the bracket with the 3 bolts.
-
Torque:
- 64 N*m{
653 kgf*cm
, 47 ft.*lbf
}
| 7.
INSTALL FRONT DRIVE SHAFT ASSEMBLY |
 |
Install the front drive shaft (Click here).
| 8.
ADD AUTOMATIC TRANSAXLE FLUID |
 |
- Fluid type:
- Toyota Genuine ATF WS
| 9.
INSPECT TRANSAXLE FLUID LEVEL |
 |
Inspect the transaxle fluid level (Click here).