REMOVAL
Removal / installation · Vehicles built from Aug 2007
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

| 3. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY |
Remove the rear console box sub-assembly (Click here).
| 4. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
Disconnect the control cable from the shift lever.

Turn the lock nut counterclockwise. While holding the lock nut, disconnect the transmission control cable from the shift lever retainer.

| 5. REMOVE FLOOR SHIFT ASSEMBLY |
Remove the 4 bolts and floor shift assembly.

Disconnect the 2 connectors and detach the clamp.

