REASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL 2ND BRAKE PISTON O-RING |
![]() ![]() |
Coat the 2 new O-rings with ATF, and install them into the 2nd brake piston.
| 2. INSTALL 2ND BRAKE PISTON |
![]() ![]() |
Press in the 2nd brake piston into the 2nd brake cylinder with your hands.
| 3. INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY |
![]() ![]() |
Install the piston return spring.
Place SST on the piston return spring, and compress the piston return spring with a press.

- SST
- 09387-00060
Using a screwdriver, install the snap ring.
- NOTICE:
- Be sure the end gap of the snap ring is not aligned with the piston return spring claw.



