DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE FRONT DIFFERENTIAL RING GEAR |
![]() ![]() |
Place the matchmarks on the ring gear and differential case.
Remove the 14 bolts.

Using a plastic-faced hammer, tap on the ring gear to remove it from the case.

| 2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING |
![]() ![]() |
Using SST, tap out the front differential case front tapered roller bearing from the differential case.
- SST
- 09950-00020
09950-00030
09950-60010 (09951-00500)
Using SST, remove the front differential case front tapered roller bearing outer race.

- SST
- 09308-00010
| 3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING |
![]() ![]() |
Using SST, remove the front differential case rear tapered roller bearing from the differential case.
- SST
- 09950-00020
09950-00030
09950-60010 (09951-00500)
Using SST, tap out the front differential case front tapered roller bearing outer race.

- SST
- 09308-00010
| 4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN |
![]() ![]() |
Using a pin punch and hammer, tap in the straight pin.
- NOTICE:
- Before removing the straight pin, unstake it with a pin punch.
| 5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT |
![]() ![]() |
Remove the front differential pinion shaft from the differential case.
| 6. REMOVE FRONT DIFFERENTIAL SIDE GEAR |
![]() ![]() |
Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.
| 7. REMOVE TRANSAXLE HOUSING OIL SEAL |
![]() ![]() |
Using SST and hammer, tap out the oil seal.
- SST
- 09950-70010
(09951-07100)
09215-00013 (09215-00471)
| 8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL |
![]() ![]() |
Using SST and hammer, tap out the oil seal.
- SST
- 09950-70010
(09951-07100)
09608-10010








