REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE TRANSMITTER BATTERY |
 |
- Push the release hook knob in the direction indicated by the arrow in the illustration. Pull the emergency key out of the transmitter.
- Using a screwdriver, remove the transmitter cover.
- NOTICE:
- Do not forcibly pry the cover.
- HINT:
- Tape the screwdriver tip before use.
- Remove the battery (lithium battery: CR1632).
- NOTICE:
- Do not push the terminals with your finger.
- Do not forcibly pry up the battery. The terminals may be damaged.
- Do not touch the battery with wet hands. Water may cause rust.
- Do not touch or move any components inside the transmitter. It may interfere with proper operation.