2005-2008 RAV4 · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. INSTALL 2ND BRAKE PISTON O-RING

  1. C083465E01
    Coat 2 new O-rings with ATF and install them into the 2nd brake piston.


2. INSTALL 2ND BRAKE PISTON

  1. C083464E01
    Press in the 2nd brake piston into the 2nd brake cylinder with your hands.


3. INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

  1. C083462E01
    Install the piston return spring.

  1. D003796E04
    Place SST on the piston return spring, and compress the piston return spring with a press.
    SST
    09387-00060  

  1. Using a screwdriver, install the snap ring.

    NOTICE:
    Be sure the end gap of the snap ring is not aligned with the piston return spring claw.

← INSPECTION (from Nov 2005)COMPONENTS (from Nov 2005) →