2005-2008 RAV4 · Service Manual BRAKE

REASSEMBLY

Removal / installation · Vehicles built Nov 2005 – Jul 2008

Versions by build date: Nov 2005 – Jul 2008 from Aug 2008


1. INSTALL BRAKE ACTUATOR BOLT CUSHION
  1. Install the 3 cushions to the actuator.


2. INSTALL BRAKE ACTUATOR BOLT HOLDER
  1. Install the 2 bolt holders to the actuator.


3. INSTALL ABS AND TRACTION ACTUATOR ASSEMBLY

NOTICE:
Do not remove the hole plug before connecting the brake tube. New actuators are filled with brake fluid.

  1. Set the actuator on the bracket.

    NOTICE:

    1. C127958E01
      Insert the cushion to the pin of the bracket securely.

    2. C127959E01
      The clearance between the bolt holder and bracket is less than 1.0 mm (0.039 in.).
    3. The projection should be set as shown in the illustration.

  1. C129070
    Install the 2 nuts to assemble the actuator and bracket.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← DISASSEMBLY (from Aug 2008)REASSEMBLY (from Aug 2008) →