INSTALLATION
Removal / installation · Vehicles built from Aug 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1.
INSTALL DOOR CONTROL RECEIVER |
 |
Install the receiver with the bolt.
Connect the receiver connector.
| 2.
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH |
 |
Attach the 7 clips to install the garnish.
| 3.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
|
 |
Install the belt hanger to the trim board.
Attach the 5 clips and 5 claws to install the trim board.
Install the bolt and 2 screws.
- Connect the rear No.1 seat belt's floor anchor.
Connect the floor anchor with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
Install the anchor cover.
| 4.
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
|
 |
Align the bracket positioning hole with the claws and install the bracket with the bolt, 2 washers and collar.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 5.
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER
|
 |
Attach the 4 claws to install the cover.
| 6.
INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH
|
 |
- Attach the 6 claws to install the bezel.
| 7.
INSTALL REAR FLOOR FINISH PLATE
|
 |
- Attach the 6 clips to install the finish plate.
| 8.
INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE
|
 |
Attach the 7 clips to install the side plate.
Install the 4 screws.
| 9.
INSTALL JACK CARRIER ASSEMBLY
|
 |
- Install the jack carrier with the 7 clips.
| 10.
INSTALL REAR FLOOR NO. 3 BOARD |
|
| 11.
INSTALL REAR FLOOR NO. 2 BOARD |
|
| 12.
INSTALL DECK BOARD ASSEMBLY |
|
| 13.
INSTALL REAR FLOOR NO. 1 BOARD |
|
| 14.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
|
| 15.
INSTALL REAR DOOR SCUFF PLATE RH |
 |
Attach the 8 screws to install the scuff plate.