INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH) |
Measure the resistance of the door control switch.

- Standard resistance:
- for LHD:
Tester Connection
Switch Condition
Specified Condition
2 (L) - 1 (E)
Lock
Below 80 Ω
2 (L) - 1 (E)
OFF
10 kΩ or higher
9 (UL) - 1 (E)
Unlock
Below 80 Ω
9 (UL) - 1 (E)
OFF
10 kΩ or higher
- for RHD:
Tester Connection
Switch Condition
Specified Condition
2 (L) - 9 (E)
Lock
Below 80 Ω
2 (L) - 9 (E)
OFF
10 kΩ or higher
8 (UL) - 9 (E)
Unlock
Below 80 Ω
8 (UL) - 9 (E)
OFF
10 kΩ or higher
- If the result is not as specified, replace the power window regulator master switch assembly.
