DTC CHECK / CLEAR
Troubleshooting · Vehicles built from Nov 2005
- HINT:
- w/ Entry and Start System only.
| CHECK DTC |
Connect the intelligent tester to the DLC3.

Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu item: Body / Sliding Roof / DTC.
Check the DTC(s).
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu item: Body / Sliding Roof / DTC / Clear.
Press the YES button.
Check that the DTCs are cleared.