2005-2008 RAV4 · Service Manual TRANSMISSION

ADJUSTMENT

Removal / installation · Vehicles built from Nov 2005


1. ADJUST TRANSAXLE CONTROL CABLE ASSEMBLY

HINT:
After the shift lever or the shift cable is replaced, be sure to adjust the transaxle control cable assembly.

  1. C133959E02
    Install the case of adjuster to the shift lever pin.

  1. Push the lock piece toward the inside of the case.

    HINT:
    Make sure that the lock piece should be locked by the slider.

← REMOVAL (from Jan 2007)INSTALLATION (Nov 2005 – Dec 2006) →