2005-2008 RAV4 · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY
  1. Install the back-up light switch and gasket to the manual transaxle case.

    Torque:
    40 N*m{ 410 kgf*cm , 30 ft.*lbf }

  1. D026905E01
    Connect the back-up light switch connector.


2. INSTALL BATTERY CARRIER

A124829
  1. Install the battery carrier bracket with the nut and 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. A124828
    Install the battery bracket reinforcement with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. A124827
    Install the No. 1 battery carrier with the 4 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the 2 clamps of the engine wire.


3. INSTALL AIR CLEANER ASSEMBLY
  1. Connect the air cleaner case to the No. 1 air cleaner inlet.

  1. A112221
    Install the air cleaner case with the 3 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 ft.*lbf }

  1. Install the air cleaner filter element.

  1. A124825
    Connect the 2 clamps of the engine wire.

  1. Connect the mass air flow meter connector.


4. INSTALL PURGE VSV

A124790
  1. Install the purge VSV to the air cleaner hose.

  1. Connect the 2 purge line hoses to the purge VSV.

  1. Connect the wire harness clamp.

  1. Connect the purge VSV connector.


5. INSTALL BATTERY TRAY

6. INSTALL BATTERY
  1. Install the battery.

  1. Install the battery clamp and tighten the bolt and nut.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

← REMOVAL (from Nov 2005)COMPONENTS (from Nov 2005) →