2005-2008 RAV4 · Service Manual
ENGINE
Home
›
ENGINE
› 1AZ-FE EMISSION CONTROL › AIR FUEL RATIO SENSOR
INSPECTION
Inspection
·
Vehicles built from Nov 2005
INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
Measure the resistance of the sensor.
Standard resistance:
Tester Connection
Specified Condition
1 (HA1A) - 2 (+B)
1.8 to 3.4 Ω at 20°C (68°F)
1 (HA1A) - 4 (A1A-)
10 kΩ or higher
If the resistance is not as specified, replace the sensor.
← REMOVAL (from Nov 2005)
INSTALLATION (from Nov 2005) →