REASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL NO. 2 COOLING FAN MOTOR |
 |
Install the No. 2 fan motor with the 3 screws.
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}
- Attach the 3 harness clamps to the fan shroud.
| 2.
INSTALL NO. 1 COOLING FAN MOTOR |
 |
Install the No. 1 fan motor with the 3 screws.
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}
| 3.
REMOVE NO. 3 VACUUM TRANSMITTING HOSE |
 |
Attach the 3 hose clamps to install the hose.
| 4.
INSTALL FAN |
 |
Install the 2 fans with the 2 nuts.
-
Torque:
- 6.3 N*m{
64 kgf*cm
, 55 in.*lbf
}
Inspect the fan motor operation.