CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Nov 2005
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
| Air Conditioning System |
| Display |
Default |
Contents |
Setting |
| Set Temperature Shift |
NORMAL |
To control with shifted temperature against display temperature |
+2 C / +1 C / NORMAL / -1 C / -2 C |
| Evaporator Control |
AUTO |
Function to set evaporator control to AUTOMATIC position (AUTO) to save power, or to coldest position (MANUAL) to dehumidify air and to prevent windows from fogging up |
AUTO / MANUAL |
| Compressor / Air Inlet DEF Operation |
LINK |
Function to turn A/C ON automatically linked with FRONT DEF button when A/C is OFF |
LINK / NORMAL |
| Compressor Mode |
AUTO |
Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF |
AUTO / MANUAL |
| Air Inlet Mode |
AUTO |
In case of turning A/C ON when you desire to make compartment cool down quickly, this is function to change mode automatically to RECIRCULATION mode |
AUTO / MANUAL |
| Foot / DEF Auto Mode |
ON |
Function to turn the air flow from Foot / DEF ON automatically when AUTO MODE is ON |
ON / OFF |
| Foot / DEF Automatic Blow up Function |
ON |
Function to change blower level automatically when defroster is ON |
ON / OFF |
| Theft Deterrent System |
| Display (Item) |
Default |
Contents |
Setting |
| Warning by Intrusion Sensor |
ON |
Function that activates alarm when intrusion is detected |
ON / OFF |
| Lighting System |
| Display (Item) |
Default |
Contents |
Setting |
| Lighting Time (Lighting Time) |
15 seconds |
Changes illumination duration after door closure. (It will quickly fade out in case of turning ignition switch on (IG). |
7.5/15/30 (seconds) |
| I/L ON /ACC OFF (Room light illuminates when ignition switch turned off) |
ON |
Illuminates light when ignition switch turned on (ACC). (Room light illuminated when room light switch in DOOR position) |
ON/OFF |
| I/L ON / UNLOCK (Room light illuminates when door key unlocked.) |
ON |
Function to light up room light, when unlocking with door key cylinder. (Room light illuminated when room light switch in DOOR position) |
ON/OFF |
| Light Control |
ON |
For A/T: Function to light up foot light when ignition switch is on (IG) and shift position is not P. For M/T: Function to light up foot light when ignition switch is on (IG) and release the parking brake lever. |
ON/OFF |
| Entry and Start System |
| Display (Item) |
Default |
Contents |
Setting |
| Park Wait Time (Waiting time to permit opening door after locking) |
3.0 s |
Function that sets waiting time to permit opening door after door is locked with entry lock function |
1.0 s / 2.0 s / 3.0 s / 5.5 s |
| Back Open Mode (Back door opening operation when vehicle is locked) |
LONG |
Function that makes back door lock, unlock switch operation available |
LONG / TWICE / OFF |
| Key Lo-Batt Wrn (Warns when key battery becomes weak) |
ON |
Function that warns driver that key's battery power is low |
ON / OFF |
| Wireless Door Lock Control System |
| Display (Item) |
Default |
Contents |
Setting |
| Hazard Answer Back |
ON |
When wireless lock switch on transmitter pressed, all hazard warning lights illuminate once. When unlock switch pressed, all hazard warning lights illuminate twice |
ON / OFF |
| Wireless Control |
ON |
ON / OFF of wireless door lock function |
ON / OFF |
| Auto Lock Time |
30s |
Function to change the time until relocking after unlocking with the wireless door lock function. |
30s / 60s / 120s* |
| Open Door Warning |
ON |
If door not completely closed and transmitter LOCK switch pressed, this function makes buzzer sound for 10 seconds |
ON / OFF |
- HINT:
- *: 120s is only displayed for vehicles that support an Auto Lock Time setting of 120 seconds.
| Combination Meter |
| Display (Item) |
Default |
Function |
Setting |
| Seat Belt Warning |
D/P ON |
Seat belt warning buzzer ON / OFF setting |
D/P ON: Driver and passenger buzzer ON D ON: Driver buzzer ON P ON: Passenger buzzer ON D/P OFF: Driver and passenger buzzer OFF |