ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT NO. 1 COOLING FAN MOTOR |
Disconnect the No. 1 fan connector.

Connect the battery and ammeter to the No. 1 fan motor connector.
Check that the No. 1 fan rotates smoothly, and then check the reading on the ammeter.
- Standard amperage:
Indication Mark
Motor Type
Condition
Specified Condition
A
80 W
At 20°C (68°F)
5.8 to 7.8 A
B, C
160 W
At 20°C (68°F)
11.7 to 14.7 A
- HINT:
- Refer to the illustration for the indication mark location.
Reconnect the No. 1 fan motor connector.
| INSPECT NO. 2 COOLING FAN MOTOR |
Disconnect the No. 2 fan connector.

Connect the battery and ammeter to the No. 2 fan motor connector.
Check that the No. 2 fan rotates smoothly, and then check the reading on the ammeter.
- Standard amperage:
Indication Mark
Motor Type
Condition
Specified Condition
A
80 W
At 20°C (68°F)
5.8 to 7.8 A
B
120 W
At 20°C (68°F)
8.4 to 10.4 A
C
160 W
At 20°C (68°F)
11.7 to 14.7 A
- HINT:
- Refer to the illustration for the indication mark location.
Reconnect the No. 2 fan motor connector.
