ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2007
| INSPECT NO. 1 COOLING FAN MOTOR |
 |
- Connect the battery and an ammeter to the No. 1 cooling fan motor connector.
Check that the fan rotates smoothly, and then check the reading on the ammeter.
- Standard amperage:
Motor Type
|
Condition
|
Specified Condition
|
240 W
|
at 20°C (68°F)
|
18.0 to 22.0 A
|
- HINT:
- Refer to the illustration for the indication mark location.
If the result is not as specified, replace the No. 1 cooling fan motor.
| INSPECT NO. 2 COOLING FAN MOTOR |
 |
- Connect the battery and an ammeter to the No. 2 cooling fan motor connector.
Check that the fan rotates smoothly, and then check the reading on the ammeter.
- Standard amperage:
Motor Type
|
Condition
|
Specified Condition
|
240 W
|
at 20°C (68°F)
|
18.0 to 22.0 A
|
- HINT:
- Refer to the illustration for the indication mark location.
If the result is not as specified, replace the No. 2 cooling fan motor.