2005-2008 RAV4 · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT NO. 1 COOLING FAN MOTOR

A127949
  1. Disconnect the No. 1 fan connector.

  1. Connect the battery and an ammeter to the No. 1 fan motor connector.

  1. Check that the No. 1 fan rotates smoothly, and then check the reading on the ammeter.

    Standard amperage:
    10.6 to 16.6 A at 20°C (68°F)

    If the result is not as specified, replace the No. 1 cooling fan motor.

  1. Reconnect the No. 1 fan connector.


INSPECT NO. 2 COOLING FAN MOTOR

A127760
  1. Disconnect the No. 2 fan connector.

  1. Connect the battery and an ammeter to the No. 2 fan motor connector.

  1. Check that the No. 2 fan rotates smoothly, and then check the reading on the ammeter.

    Standard amperage:
    7.8 to 11.8 A at 20°C (68°F)

    If the result is not as specified, replace the No. 2 cooling fan motor.

  1. Reconnect the No. 2 fan motor connector.

← COMPONENTS (from Nov 2005)REMOVAL (Nov 2005 – Dec 2006) →