ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT NO. 1 COOLING FAN MOTOR |
![]() ![]() |
Disconnect the No. 1 fan connector.
Connect the battery and an ammeter to the No. 1 fan motor connector.
Check that the No. 1 fan rotates smoothly, and then check the reading on the ammeter.
- Standard amperage:
- 10.6 to 16.6 A at 20°C (68°F)
Reconnect the No. 1 fan connector.
| INSPECT NO. 2 COOLING FAN MOTOR |
![]() ![]() |
Disconnect the No. 2 fan connector.
Connect the battery and an ammeter to the No. 2 fan motor connector.
Check that the No. 2 fan rotates smoothly, and then check the reading on the ammeter.
- Standard amperage:
- 7.8 to 11.8 A at 20°C (68°F)
Reconnect the No. 2 fan motor connector.



